Black Table Top

Table-Top Stand/Supports/Base/Feet for Pioneer 60 & 61 TVs & Plasma Displays

Table-Top Stand/Supports/Base/Feet for Pioneer 60 & 61 TVs & Plasma Displays
Table-Top Stand/Supports/Base/Feet for Pioneer 60 & 61 TVs & Plasma Displays
Table-Top Stand/Supports/Base/Feet for Pioneer 60 & 61 TVs & Plasma Displays
Table-Top Stand/Supports/Base/Feet for Pioneer 60 & 61 TVs & Plasma Displays
Table-Top Stand/Supports/Base/Feet for Pioneer 60 & 61 TVs & Plasma Displays
Table-Top Stand/Supports/Base/Feet for Pioneer 60 & 61 TVs & Plasma Displays
Table-Top Stand/Supports/Base/Feet for Pioneer 60 & 61 TVs & Plasma Displays
Table-Top Stand/Supports/Base/Feet for Pioneer 60 & 61 TVs & Plasma Displays
Table-Top Stand/Supports/Base/Feet for Pioneer 60 & 61 TVs & Plasma Displays
Table-Top Stand/Supports/Base/Feet for Pioneer 60 & 61 TVs & Plasma Displays
Table-Top Stand/Supports/Base/Feet for Pioneer 60 & 61 TVs & Plasma Displays
Table-Top Stand/Supports/Base/Feet for Pioneer 60 & 61 TVs & Plasma Displays

Table-Top Stand/Supports/Base/Feet for Pioneer 60 & 61 TVs & Plasma Displays

Providing support, service and supply of current and older Pioneer Audio/Visual products.. Wisbech, North Cambridgeshire, United Kingdom. Table-Top Stands for 60" and 61" Pioneer Plasma Displays and TVs.

(W x H x D) 40 x 885 x 360mm (x2). These after-market supports are manufactured by us specifically for all 60" and 61" Pioneer branded Plasma TVs and Displays. They can can be used with or without side speakers and have two height settings so they are suitable for use with or without an undermount speaker fitted.

We have designed them so the display will sit at the same height as it would with one of the original Pioneer branded table-top stands. The supports are 88.5cm high and attach to the rear of the plasma display using the wall mount holes.

Two height settings with the option to mount the screen higher to accommodate an official Pioneer undermount speaker at the bottom (lower setting shown in photographs). Vertical support columns bolt to the rear of the plasma display using the wall mount holes providing a neat finish and very secure mounting. Solid metal base (no plastic caps) with high-grade steel box section support columns making these incredibly strong. Satin black finish to minimise reflections from the screen. Note: These are individually hand-made locally in the UK so although we try to maintain a certain level of finish there may be small imperfections. Pioneer plasma displays are front-heavy due to the glass screen so weight distribution is different to LCD, LED and OLED screens. Before deciding to manufacture these we tried to source after-market options to keep costs down.

The few we found that fitted were very unstable and also allowed the top edge of the screen to tilt forward. Due to this we decided to manufacture our own supports.

They have been engineered to be more than capable of supporting the weight of the 60" and 61" panels. We estimate they are actually capable of holding 200+kg. When the TV is on the lower setting the bottom of the screen is approx. 73mm from the table-top (same as the official stands). When the TV is on the higher setting the bottom of the screen is approx.

Use this setting with an undermount speaker or if you wish to have the screen sit a little higher than normal (handy for placing equipment underneath). In the higher setting, with an undermount speaker fitted the bottom of the speaker is approx.

The horizontal distance between the legs is approx. 810mm (from inside edges) and 890mm (from outside edges).

360mm deep (front to back). These supports are suitable as a direct replacement for the below Pioneer branded table-top stands.

PDK-TS30, PDK-TS30A, PDK-TS35A and KRP-TS01. Suitable for all Pioneer branded 60" and 61" model screens (for use with or without an undermount speaker) including the below models. Some model numbers may vary slightly from region to region.

These supports fit all 60" and 61" displays and TVs manufactured by Pioneer. Collection and full demonstration welcome on any item. Flat screen display panels and televisions are collection ONLY unless stated. There is a surcharge for remote regions in the UK. These include but are not limited to Channel Islands, Isle of Wight, Isle of Man, Scilly Isles, Scottish Highlands, Scottish Islands & Northern Ireland. The item "Table-Top Stand/Supports/Base/Feet for Pioneer 60 & 61 TVs & Plasma Displays" is in sale since Wednesday, October 2, 2019. This item is in the category "Sound & Vision\TV & Home Audio Accessories\TV Stands & Mounts".

The seller is "the_pioneer_man" and is located in Wisbech, North Cambridgeshire. This item can be shipped to North, South, or Latin America, all countries in Europe, all countries in continental Asia, Australia, New Zealand, Egypt, Reunion, South africa.

  • Country/Region of Manufacture: United Kingdom
  • Custom Bundle: No
  • Suitable For Screen Size: 60" 61"
  • Type: Table-Top Stand
  • Modified Item: No
  • Main Colour: Blacks
  • Non-Domestic Product: No
  • MPN: KRP-TS01 PDK-TS35A PDK-TS30
  • Brand: Unbranded
  • Manufacturer Warranty: 1 year


Table-Top Stand/Supports/Base/Feet for Pioneer 60 & 61 TVs & Plasma Displays